Description | PN | L4C | L4F | L6C | L6F | RTX | J22 | J33 | RTXiS | Price | Buy |
---|---|---|---|---|---|---|---|---|---|---|---|
EGT, 0.75-1.25" Hose Clamp | 10-01844 | - | - | - | - | 2 | - | - | - | $60.75 | |
EGT, 1-2.25" Hose Clamp | 10-01169 | 4 | 4 | 6 | 6 | - | - | - | - | $60.75 | |
EGT, 1-1.75" Hose Clamp | 10-05079 | -- | -- | -- | -- | -- | 4 | 6 | - | $60.75 | |
CHT Adjustable Bayonet, 3/8-24 UNF | 10-01170 | 4 | 4 | 6 | 6 | - | - | - | - | $68.75 | |
CHT, Ring Terminal 12mm | 10-01845 | - | - | - | - | - | 4 | 6 | - | $45.90 | |
Manifold Pressure 0-60" Hg, 1/8" Hose | 10-01171 | 1 | 1 | 1 | 1 | 1 | - | - | - | $137.75 | |
Oil Temperature 5/8-18 UNF 100-240 F | 10-01173 | 1 | 1 | 1 | 1 | - | - | - | - | $53.75 | |
Carburetor Air Temperature 1/4-28 UNF, -50 to 150F | 10-01846 | 1 | - | 1 | - | - | - | - | - | $68.75 | |
AMPS Shunt 0-60 | 10-01178 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | $38.50 | |
Fuel Flow Sensor 1/4 Female NPT .6-70 GPH | 10-01165 | - | - | - | - | - | - | - | - | $257.95 | |
EGT 2 Cylinder 6 ft | 10-01847 | - | - | - | - | 1 | - | - | - | $137.75 | |
EGT/CHT 4 Cylinder 6 ft | 10-01179 | 1 | 1 | - | - | - | 1 | - | - | $213.95 | |
EGT/CHT 6 Cylinder 6 ft | 10-01180 | - | - | 1 | 1 | - | - | 1 | - | $236.95 | |
Engine Sensor Main Wire Harness 6 ft | 10-01181 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | $229.95 | |
EGT Thermocouple Extension Wire, K Type | 10-01167 | - | - | - | - | - | - | - | - | $5.55 | |
CHT Thermocouple Extension Wire, J Type | 10-01168 | - | - | - | - | - | - | - | - | $4.45 |
Dynon Avionics engine sensors, harnesses & packages. |
Ordered as spares since reliability of Dynon probes are awful.
DYNON EMS EGT SENSOR HOSE CLAMP 1"-2" LYC CONT
Had to replace due to low reliability of Dynon probes.
DYNON EMS CHT SENSOR BAYONET 3/8" UNF LYC CONT
I replaced a burnt Floscan with this Red Cube and they work exactly the same.
EI FUEL FLOW SENSOR 1/4" FEMALE NPT FT 60 FOR DYNON EMS SYSTEMS
As expected, thanks.
DYNON EMS CHT SENSOR BAYONET 3/8" UNF LYC CONT
As expected, thanks.
DYNON EMS EGT SENSOR HOSE CLAMP 1"-2" LYC CONT
Exelent product !!!! Work very good !!!
DYNON EGT SENSOR HOSE CLAMP .75" - 1.25" ROTAX
Always need spares.
DYNON EMS EGT SENSOR HOSE CLAMP 1"-2" LYC CONT
Fast!!
DYNON EMS EGT SENSOR HOSE CLAMP 1"-2" LYC CONT
DYNON CHT SENSOR RING TERMINAL 12MM JABIRU
DYNON EGT PROBE JABIRU 1-1.75 HOSE CLAMP
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
As supplied by Dynon Avionics, this (and all other "Kavlico" sensors) do come with a connector and wires.
Yes, part # 10-01168 is sold by the foot.
This probe is directly from Dynon.
Part # 10-01169 is priced and sold individually.
This is a pinned out connector harness with thermocouple wires inserted in the connector. No probes are included.
No, p/n:10-01847 is just the harness. For the probe you can view p/n: 10-01844.
This is the sender with a clamp.
It is 0.1 inch.
Probe wire length is 24 inches, the EGT/CHT harness from the skyview is 6 feet.